
Hot Water Replacement Boronia
Cylinder leaking from the base, or a system that keeps failing? We replace hot water units across Boronia, size the new one to how you actually use water, and take the old tank away. Ring 03 8804 5837.
- Licensed Victorian plumbers
- Based in Boronia, City of Knox
- Price agreed before work
- Night and weekend call-outs
When it is time to replace
A hot water system does not have to be dead to be worth replacing. These are the signs we look for:
- Water leaking from the tank itself, not a valve or fitting. The inner tank has corroded and cannot be repaired.
- Rusty water from the hot taps, which usually means the anode is spent and the tank is rusting inside.
- Age. Many electric storage units last ten to fifteen years. Past that, any major repair is a gamble.
- Repeated failures: a new element last year, a thermostat this year, a relief valve on and off.
- Not enough hot water for the household, because the family has grown or the unit was undersized in the first place.
- Running costs. An old electric element unit is one of the biggest energy users in a typical home.
If your unit is leaking, isolate it at the cold water valve and switch it off at the switchboard, then ring 03 8804 5837. We can usually replace like for like quickly, and we can talk through upgrade options if you have a little time to decide.
Choosing the right replacement
The right system depends on your household, your house and your plans. We talk you through it rather than fitting whatever is on the truck.
Electric storage
A mains-pressure electric storage cylinder is the simplest replacement if you have one now. It is quick to install, often in the same position with the same connections. On an off-peak tariff, running costs are reasonable for smaller households. The downside is that a standard element is less efficient than a heat pump or solar system, so running costs are higher over the life of the unit.
Heat pump
A heat pump uses a fan and compressor to draw warmth from the air and transfer it into the water, using a fraction of the electricity of a standard element. Many Boronia households are moving to heat pumps when the old electric unit fails. They need good airflow, space for the unit and a spot where the fan noise will not bother you or the neighbours. Some models cope better than others on cold foothills nights. See our heat pump hot water page for detail.
Solar
Solar hot water uses collectors on the roof to heat water, with an electric booster for cloudy days. It suits homes with a clear, north-facing roof. In Boronia, tall trees can shade roofs for much of the day, especially on the eastern side of the suburb under the hills, so we look carefully at shading before recommending solar.
Sizing the new unit
A system that is too small runs out mid-shower. One that is too big costs more to buy and keeps more water hot than you need. We ask:
- How many people live in the house, and is that likely to change?
- How many bathrooms and showers, and when does everyone shower?
- Is there a bath, a large shower head or a spa?
- Does the dishwasher or washing machine use hot water?
- Is the unit on an off-peak tariff that only heats overnight?
From that we recommend a capacity and system type, explain why, and give you a firm price for supply and installation.
Where it goes
In many Boronia homes the existing unit sits outside against the laundry or bathroom wall. Replacing in the same spot is simplest. But the replacement is also a chance to fix poor positions: a unit at the far end of the house from the main bathroom means a long wait for hot water and wasted water down the drain every morning. If moving it makes sense, we explain what is involved.
Heat pumps need airflow and should not sit in a closed cupboard. Internal units need a safe tray and drain. Units in garages need protection from car impacts. We plan for all of this before installation day.
What installation involves
- Isolate and drain the old unit and disconnect it.
- Remove the old unit and take it away for recycling.
- Prepare the position, including a new base or slab if needed.
- Install the new unit with a new relief valve, cold water expansion control valve where required, isolating valve, non-return valve and pressure limiting valve if mains pressure is high.
- Fit a tempering valve so bathroom water is limited to a safe temperature, as Victorian rules require for replacement units.
- Connect the water and arrange the electrical connection by a licensed electrician where required.
- Fill, test and commission the unit, check for leaks and test the temperature at the taps.
- Lodge a compliance certificate for the installation.
Most like-for-like replacements are done in a few hours. Changing system type or position can take longer, and we tell you before we start.
Rebates and incentives
Victorian and federal programs have at times offered rebates or discounts for replacing electric storage units with heat pumps or solar. These change regularly, have eligibility rules and often need an approved installer. We can point you to current programs, but please check the details with the program directly, as we cannot guarantee your eligibility.
Clearing up afterwards
Old hot water units are heavy and awkward. We remove the old unit, packaging and offcuts and leave the area tidy. Steel and copper from old cylinders are recycled.
Hot water replacement across Knox
We replace hot water systems in Boronia, Bayswater, Wantirna, The Basin, Ferntree Gully, Upper Ferntree Gully, Knoxfield, Sassafras and Heathmont. Ring 03 8804 5837 with the brand, size and age of your current unit, which you will find on the compliance label on the side, and we can usually give you options on the phone.
Read this first
What you get with hot water replacement
- In the van
- Drain camera and locator, high-pressure jetter, drain machine, acoustic leak detector, thermal camera, pressure gauges
- Licensing
- Victorian licences for water supply, sanitary, drainage and roofing
- Quoting
- Cause explained and price agreed before work, written quotes for larger jobs
- Parts
- WaterMark-certified fittings and products that meet Australian Standards
- Certificates
- Compliance certificates for regulated plumbing work, photos for your records or insurer
- Leaving
- Old parts removed, the work area cleaned and everything tested with you
Send us the job details
Send the details and a licensed plumber from Boronia will call you back. Water flooding or a sewer overflowing? Do not wait for a reply, ring 03 8804 5837 now.
Every job is quoted on what we actually find. That is why you will not see a price list on this site.
Hot Water Replacement in Boronia: questions
How long does hot water replacement take?
Most like-for-like replacements take a few hours. Changing to a heat pump or moving the unit can take longer.
Can you replace my hot water unit today?
Often, yes, for common electric storage sizes. Ring 03 8804 5837 early in the day with the details from your current unit's label.
Should I replace with the same type of system?
Not necessarily. It is a good time to consider a heat pump or solar system, which cost less to run. We explain the trade-offs for your home.
What size hot water system do I need?
It depends on how many people live in the house, how many showers you have and when you use hot water. We size it with you rather than guessing.
Do you take the old unit away?
Yes. We remove and recycle the old unit as part of the job.
Will I get a compliance certificate?
Yes. Hot water installations are regulated work, and we lodge a compliance certificate for every installation.
Local, careful and upfront
Sloping blocks, heavy clay, gum and elm roots in old earthenware sewers, 1970s brick veneers and newer townhouse rows: Boronia plumbing has its own habits and we know them.
Cause and cost before work starts. If something changes once a wall or a drain is open, we stop and talk it through with you.
Camera inspections, high-pressure jetting, acoustic and thermal leak detection, pressure testing. We look before we dig.
Water supply, sanitary, drainage and roofing work by licensed plumbers, with compliance certificates lodged where the law needs them.
More plumbing services around Boronia
Suburbs we cover from Boronia
We are based in Boronia and work the Knox side of the Dandenong foothills: Bayswater and Wantirna to the north and west, The Basin and Sassafras up the hill, Ferntree Gully, Upper Ferntree Gully and Knoxfield to the south, and Heathmont over the Maroondah line. Somewhere else nearby? Ring 03 8804 5837 and ask.
Plumbing problem in Boronia?
Ring a local licensed plumber. You hear the price before any work starts.