
Leaking Tap Repairs Boronia
A dripping tap wastes water every minute and only gets worse. We fix leaking taps and mixers in Boronia kitchens, bathrooms, laundries and gardens, or fit new tapware. Ring 03 8804 5837.
- Licensed Victorian plumbers
- Based in Boronia, City of Knox
- Price agreed before work
- Night and weekend call-outs
Why fix a dripping tap now
A tap that drips once a second can waste thousands of litres of water a year. On the hot side, you are also paying to heat water that goes straight down the drain. A slow drip also means a worn part that will get worse, and constant dripping can stain basins and leave mineral scale on sinks. Most tap repairs are quick and inexpensive compared with the water they save.
Types of taps in Boronia homes
Pillar and wall taps with washers
Many original 1960s and 1970s Boronia bathrooms and laundries still have separate hot and cold taps with rubber washers on a jumper valve. Turning the handle pushes the washer down onto a brass seat to stop the water. Over time the washer hardens and splits, and the seat wears or pits. Replacing the washer fixes most drips, but a worn seat needs to be re-cut or the tap body replaced, otherwise the new washer will leak again quickly.
Ceramic disc taps
Quarter-turn taps use two ceramic discs that slide over each other. They do not have washers, but grit can scratch the discs, and the rubber seals on the cartridge wear out. A leaking ceramic tap usually needs a new cartridge of the right type.
Mixer taps
Single-lever mixers in kitchens and bathrooms use a cartridge that controls both flow and temperature. When the cartridge wears, the mixer drips from the spout, leaks around the base, or becomes stiff and hard to control. We replace cartridges for common brands, and where parts are no longer available, we recommend a new mixer.
Garden taps
Outdoor taps take a beating from weather, hoses and kids. Leaks often come from the washer, the spindle gland or the joint where the tap meets the wall. In Boronia's clay, a leaking garden tap can soak the ground near footings for months, so it is worth fixing promptly.
Common tap leaks and what they mean
- Drip from the spout when off: worn washer, seat or cartridge.
- Water around the handle when on: worn spindle O-rings or gland packing.
- Leak at the base of a mixer: worn cartridge seals or base O-rings.
- Water under the sink or vanity: leaking flexible hose, isolation valve or waste fitting, not the tap itself.
- Tap hard to turn or spinning freely: stripped spindle or worn jumper.
- Hammering when the tap is turned off: high water pressure or loose pipe clips. See our water pressure page.
How we fix leaking taps
- Turn off the water to the tap, using an isolation valve if there is one, otherwise at the meter.
- Dismantle the tap and inspect the washer, jumper, seat, cartridge and O-rings.
- Replace worn parts, re-cut the seat on older taps where needed, and clean out grit and scale.
- Reassemble, restore water, and check for drips at the spout, handle and base.
- Check flexible hoses and isolation valves while we are there.
If your taps are worn throughout the house, it often makes sense to repair them all on one visit.
Repair or replace?
We repair first where it makes sense. Replacement is usually better value when the tap body is corroded or cracked, the seat is too worn to re-cut, parts are no longer made, the tap leaks repeatedly after repairs, or you are updating the room anyway. We fit tapware you have bought or can supply quality WaterMark-certified taps.
Can I fix it myself?
Changing a washer on a simple pillar tap is a job some handy homeowners take on. The usual mistakes are not turning the water off properly, damaging chrome with the wrong tool, fitting the wrong size washer, or not noticing a worn seat. Mixer cartridges are brand-specific and easy to damage. Our dripping tap guide explains how to tell what kind of tap you have. If in doubt, ring us.
Hard water, scale and grit
Melbourne's water is generally soft, but grit can enter the pipes after mains works in the street or repairs to your own plumbing, and scratch ceramic discs and washers. If several taps started dripping after works nearby, grit is a likely cause. We clean out the debris and replace damaged parts.
Leaking tap repairs across Knox
We repair leaking taps in Boronia, Bayswater, Wantirna, The Basin, Ferntree Gully, Upper Ferntree Gully, Knoxfield, Sassafras and Heathmont. Ring 03 8804 5837 or send a photo of the tap so we bring the right parts.
Outdoor tap upgrades
Many Boronia homes have a single garden tap at the front and one at the back. Adding extra taps, fitting lockable taps or replacing old taps with quarter-turn versions makes gardening easier. We do these jobs too.
Read this first
What you get with leaking tap repairs
- In the van
- Drain camera and locator, high-pressure jetter, drain machine, acoustic leak detector, thermal camera, pressure gauges
- Licensing
- Victorian licences for water supply, sanitary, drainage and roofing
- Quoting
- Cause explained and price agreed before work, written quotes for larger jobs
- Parts
- WaterMark-certified fittings and products that meet Australian Standards
- Certificates
- Compliance certificates for regulated plumbing work, photos for your records or insurer
- Leaving
- Old parts removed, the work area cleaned and everything tested with you
Send us the job details
Send the details and a licensed plumber from Boronia will call you back. Water flooding or a sewer overflowing? Do not wait for a reply, ring 03 8804 5837 now.
Every job is quoted on what we actually find. That is why you will not see a price list on this site.
Leaking Tap Repairs in Boronia: questions
How much water does a dripping tap waste?
A tap dripping once a second can waste thousands of litres a year, and on the hot side you pay to heat it too.
Why does my tap still drip after a new washer?
The brass seat underneath is probably worn or pitted. It needs re-cutting or the tap needs replacing.
Can you fix mixer taps?
Yes. We replace cartridges and seals on common mixer brands, or fit a new mixer if parts are unavailable.
Do you fix outdoor taps?
Yes. We repair and replace garden taps and the pipes feeding them.
Can you install taps I have bought?
Yes. We check they suit your basin or sink and water pressure, and install them.
Should I fix all my taps at once?
If several are worn, doing them on one visit is usually more efficient and saves a second call-out.
Local, careful and upfront
Sloping blocks, heavy clay, gum and elm roots in old earthenware sewers, 1970s brick veneers and newer townhouse rows: Boronia plumbing has its own habits and we know them.
Cause and cost before work starts. If something changes once a wall or a drain is open, we stop and talk it through with you.
Camera inspections, high-pressure jetting, acoustic and thermal leak detection, pressure testing. We look before we dig.
Water supply, sanitary, drainage and roofing work by licensed plumbers, with compliance certificates lodged where the law needs them.
More plumbing services around Boronia
Suburbs we cover from Boronia
We are based in Boronia and work the Knox side of the Dandenong foothills: Bayswater and Wantirna to the north and west, The Basin and Sassafras up the hill, Ferntree Gully, Upper Ferntree Gully and Knoxfield to the south, and Heathmont over the Maroondah line. Somewhere else nearby? Ring 03 8804 5837 and ask.
Plumbing problem in Boronia?
Ring a local licensed plumber. You hear the price before any work starts.