Dripping tap: washer or cartridge?
The fix for a dripping tap depends on what type of tap it is. Here is how to tell.
- Licensed Victorian plumbers
- Based in Boronia, City of Knox
- Price agreed before work
- Night and weekend call-outs
Washer taps
Older pillar taps and wall taps, common in Boronia's original bathrooms and laundries, take several full turns to go from off to fully on. Inside, a rubber washer on a jumper valve presses down onto a brass seat. When the washer wears or hardens, or the seat becomes pitted, the tap drips.
The fix: replace the washer and jumper, and re-cut the seat if it is worn. If the seat is not re-cut, a new washer may only last a short time.
Ceramic disc taps
Quarter-turn taps go from off to fully on in a quarter or half turn. Inside, two ceramic discs with holes slide over each other. They do not wear like washers, but grit can scratch them and seals can fail.
The fix: replace the cartridge with the correct type for that tap.
Mixer taps
Single-lever mixers control flow and temperature with one handle. They use a cartridge that wears over time, causing drips, stiffness or leaks at the base.
The fix: replace the cartridge. Parts are brand-specific.
Other leaks
- Water around the handle when the tap is on: worn O-rings or gland packing.
- Water under the sink: likely a hose or valve, not the tap.
When to call
Ring 03 8804 5837 if you are not sure which type you have, if a new washer has not fixed it, or if it is a mixer. Send a photo and we can bring the right parts. See our leaking tap repairs page.
More guides
Send us the job details
Send the details and a licensed plumber from Boronia will call you back. Water flooding or a sewer overflowing? Do not wait for a reply, ring 03 8804 5837 now.
Every job is quoted on what we actually find. That is why you will not see a price list on this site.
Plumbing problem in Boronia?
Ring a local licensed plumber. You hear the price before any work starts.